The Registration center did not answer. Please try again.
No dial tone was detected. Check your cable connections and try again.
The Registration center was busy. Please try again.
The TelePort modem is not responding.
Check your cable connections and try again.
The connection has been dropped.
The telephone connectors plugged into TelePort may be reversed. Compare your connections to the diagram shown on page 4 of the manual and try again.
Your registration information was not successfully received. Please try again.
Preparing TelePort modem…
Dialing:
Checking into the Registration center…
Transferring registration information…
Registration completed.
If you need to register again in the future, to change your address or other information, use the “Register” button in the TelePort control panel.
Press the “Retry” button to try again. Press the “Cancel” button if you wish to register the next time you restart the Macintosh. Press the “Previous” button to adjust your settings.
(415) 329-0708
Enter the long distance code you use when making a toll-free call (“1” is the most common code):
ATX1D
Connecting with the registration center…
Enter the International Access Code and US Country code you use when making an international call:
0123456789 #*@!,()-./
Retry
Stop
Press “Cancel” to dismiss this window.
Could not find the TelePort serial driver. Unknown error.
Cannot register because another application or task has opened the TelePort serial driver.
Could not open the TelePort serial driver. Unknown error.
The registration center does not seem to be functioning correctly. Please call our voice number, (800) 736-4821 or (415) 329-0700, to register.
Please limit your comments to 500 characters.
Press “Register” after you have configured the registration number for your location.
Do you have to dial a special prefix, such as “9”, to get an outside line ?